1Wire Reader 125kHz
Xirgo Global devices support RFID readers, working based on 1Wire.
This equipment is supported by following devices of FMS series: Light, Light+, StCAN, Tacho, XtCAN.
Specifications
Power supply | 6.5-30 Volts |
Active Current | 12mA (without LED) |
Frequency | 125 kHz |
Reading distance | ~4 cm |
Bi-color LED | Green/Red |
Active Current LED | 10 mA per color |
I. Operating with RFID Reader via 1Wire.
a) Physical connection.
Connect Reader as in schematics below:
Connect white wire of RFID Reader to 1Wire interface of device (brown wire). Gray wire - connect to Ground. Yellow- to Plus. Green and brown are optional (can connect one of them to Ground to get color wanted). Pinout of reader as follows:
Yellow | Power supply (6.5-30 volts DC) |
Gray | Ground |
White | 1-Wire Data |
Green | Cathode green LED |
Brown | Cathode red LED |
b) Configuration.
To configure device to work with external equipment, need to make adjustments in the settings.
It is Logic template of regular devices, or Setting template in case of SDK line of devices.
Example of configuration for iButton functionality can be found in following links.
Regular devices: iButton configuration for logic template.
SDK devices: iButton configuration for Setting template.
c) Displaying in Monitoring platform.
ID, read from RFID, will come in dallas_id parameter for regular devices, or in sensor20480 for SDK devices.