Waterproof case can be used if you need to install trackers outside, in wet or dusty environment. It has IP67 standard.

I. Installing PCB plate into the case.

Step 1: Locate 4 locking pins that will hold PCB in place.

Step 2: Place PCB inside internal case using slight degree.

Step 3: Match PCB with locking pins and lock it.

Step 4: On cable there is latch that has to be locked with tracker connector locking pin.

Step 5: Locate tracker connector locking pin.

Step 6: Connect the cable.

Step 7: Locate external case locking pins.

Step 8: Match internal case locking pins with external ones.

Step 9: Lock up.

II. Colors of waterproof case cables.

FMS500 ONE:

FMS500 Light:

FMS500 Light+:

FMS500 StCAN / XtCAN / Tacho: