Panic Button
Panic buttons are used to send instant signal to the platform or make a notification in case of emergency.
This equipment is supported by all Xirgo Global devices of FMS series: ONE, Light, Light+, StCAN, Tacho, XtCAN.
a) Physical connection.
Panic button can be connected to any digital input (In2, In3, In4, In5).
For example, connect Button as in schematics below (In2 used):
One pin of Panic button should be connected to contact Plus, another pin - to digital input of device.
b) Adjustments in Logic Template.
To work properly, need to configure Logic template of device in FMSet, instructions here: Panic button.
c) Displaying in Monitoring platform.
To monitoring platform parameter of triggered Panic button will comе as active digital input. For example, IN2=1.