/
Fuel level sensor for XG37/XG47

Fuel level sensor for XG37/XG47


Note: Before starting to configure the settings template, make sure that the fuel level sensor interfaces and Baud rate are set correctly. The fuel level sensor should be configured to work on the 19200 baud rate.

When the physical connection is done, make adjustments in the Setting template, assigned to your device.

First, assign the BCE_MEAS_LLS-FUEL-Sensor-SCR-1_7 script for the LLS fuel sensor.

 

image-20260113-090734.png

A new branch will appear after the selection of the script.
Main settings of the script provide an option to choose between RS232 and RS485.

 

image-20260113-090808.png

 

Assign user-defined values in the Parameters settings.

 

image-20260113-090844.png

 

Sensors that were chosen for each parameter must be added to Data recording section
If you are using a settings template that gives you an option to use simple data recording, enable user-defined values as shown in the example below.

 

image-20260113-090949.png

The values will be sent to your monitoring platform on the same sensor number you defined in the data recording packet.