Deep Sleep
Enabling deep sleep in the device settings template.
Open the settings template in which You want to enable deep sleep functionality.
On the left side of the settings template, click on Deep Sleep → Deep Sleep settings
On the right side of the settings template, a Deep sleep configuration window will appear.
Deep sleep scenarios:
Sleep condition: Ignition not present. Wake up condition: Ignition present.
In Sleep condition line select: Sleep when IN5 not present
In Wake up conditions, line select IN5
In Stay awake period, select time period how long the device should stay awake before it goes to sleep after it detects the ignition is off.
Sleep condition: Motion not present. Wake up condition: Motion detected.
In Sleep condition line select: Sleep when motion not present.
In Wake up conditions line select Motion
In Stay awake period, select time period how long the device should stay awake before goes to sleep after it detects there is no motion.
Sleep condition: Ignition not present. Wake up condition: Sleep timeout 60 minutes or Ignition present.
In Sleep condition line select: Sleep when IN5 not present.
In sleep period, enter value: 60
In Wake up conditions line select IN5 and Sleep timeout
In Stay awake period, select time period how long the device should stay awake before goes to sleep after it detects there is no ignition, or after it has woke up from sleep.
According to the previous logic, You can apply any scenario from the Sleep condition dropdown window:
Multiple wake up condition can be used if necessary.