/
Device Configuration - USB

Device Configuration - USB

I. Configuration Download.

Step 1: Click Configurations icon in the main menu bar. The devices page appears.

image-20250422-112227.png

 

List of all configurations created will appear in your screen.

Step 2: In the Actions menu click on the download icon to get the binary configuration file.

image-20250422-112310.png

II. Firmware Download.

Step 3: Click Firmwares icon in the main menu bar. All available and assigned firmwares will appear..

image-20250422-112435.png

Step 4: Click on download icon to get the firmware .aes file.

image-20250422-112507.png

 

III. Uploading files to device.

Step 5: Connect device to a PC.

Note.  Device must be disconnected from any power source (internal battery as well).
 Using USB – mini USB cable connect device to a computer.

 

Step 6: New flash drive will appear. In some cases you might need to format the flash, before uploading the file.

 

Step 7: Copy/paste the configuration file or the firmware file to the flash drive.

Note: Insert only one file at once. If you need to update both -FW & settings, do it separately. After uploading one file, connect device to the power, then disconnect and upload another file.

 

Step 8:  Disconnect the USB cable and power up the device. It should take a couple of seconds for the device to boot up and flash the new settings or FW.