/
ASAIR CM2305

ASAIR CM2305

image-20250606-073021.png

 

1-Wire sensors is supported on Xirgo Global devices with 1-Wire communication.

XG37 Series

  • Light

  • Light+

  • XtCAN

  • Tacho

LX40 Series

  • LX42

  • LX43

  • LX44

  • LX45

1. Physical Connection

It is important to notice that CM2305 needs to be ordered from supplier with Molex-Pico 1.5mm 3pin connector to able to plug into available slot on XG device

Following XG output connector will be used for this sensor. This connector supplies 5V output up to 50mA.

image-20250606-075010.png
image-20250606-074646.png

 

2. Adjustments in Configuration

To configure device to work with CM2035 temperature sensors in XDM configuration template under ‘Hardware'->’1-wire'->'1-wire settings' select ‘1-wire function' to 'CM2305 sensor’

image-20250606-074601.png

3. Displaying in Monitoring Platform

For more in depth configuration of device configuration visit Quick Set Up Of Configuration

To configure device to send 1-wire temperature sensors parameters to telemetry server following sensors needs to be added to payload:

  • SENSOR_OW_HUMIDITY (12360)

  • SENSOR_TEMPERATURE_1 (40983)

image-20250606-075326.png

4. ASAIR CM2305 Documentation

Official documentation containing technical specifications of ASAIR CM2305 sensor.