SIM number list for SMS commands

This functionality allows to program specific SIM numbers to device memory. Once the numbers are uploaded, device will accept commands received only from those specific numbers.

1. Functionality is supported by QCP3; CCP3; SCP3 and later firmware releases.
   
   
   

2. Adjustments in XML logic template must be made.
   
   

   1. Special option must be selected in GeneralBitConfig2 (see picture1).

   2. Be aware, that until this function is enabled, device won’t accept commands from unauthorized numbers (even if you remove the list with numbers).
      
      
      

3. Phone numbers must be inserted to the list and list uploaded to the unit (Picture2)
   
   

   1. SIM numbers can be inserted in decimal or hexadecimal formats (in Picture2  you can see phone number in international format and same number in HEX format).

   2. SIM numbers are uploaded to "ID list“.

Picture 1. Enabling configuration of SIM numbers:

Open

Picture 2. Uploading phone numbers to ID list:

Open

4. By using special format, it is possible to receive confirmation about executed commands. In the end of the message write: „ack“ to receive an answer (see example in Picture 3).

Picture 3. Confirmation about executed command:

Open