Technical specifications (Tacho)

General
Interfaces	2 CAN lines operating simultaneously: CAN line1: FMS CAN (protocol J1939); CAN line2: digital tachograph. Remote tachograph data download & real time tachograph data; FMS CAN (protocol J1939); Volvo/Renault CAN (protocol J1708, without adapters); Additional sensors via J1939 protocol; OBDII (diagnostic protocol of light vehicles, SAE-1979 w/o adapters); CAN protocols of light vehicles (without adapters); 1-Wire; RS-232; EIA-485; Wiegand 26 bit; Thermo data logger support (Thermo King TouchPrint, DataCold, Transcan).
Inputs	4x digital (frequency, impulse counter, ON/OFF modes); 3x analogue, 11 bit, 0-31V.
Outputs	2x digital, (-).
Power supply	9 – 31V; Protection from impulses up to 150V; Registration of power cut-off to device event log; Internal battery 210/850 mAh (optional).
Consumption	Full active without load on outputs: 100mA; Full active with maximum load on output: 100mA + 500mA x [ number of outputs ]. Deep sleep: <4 mA.
Internal memory	8 МB, up to 150.000 entries.
Accelerometer	3 axis digital accelerometer.
Internal odometer	+
Operational temperature range	From -40 to +85 C° without battery, -20 to +60 C° with battery.
Dimensions	68 x 91 x 19 mm
Weight	Tracker – 64 g, set – 160 g.
GSM	Internal antenna.
GSM/GPRS class	10 (up to 85,6 kbit), class B.
Detection of GSM jamming	+
GNSS	Internal antenna.
Sensitivity	-162 dBm
Acquisition	Cold <30 s, hot 1 s. A-GPS support.