/
Technoton DUT-E S7 [BLE]

Technoton DUT-E S7 [BLE]

image-20250523-113853.png

 

Technoton DUT-E S7 fuel level sensor uses BLE and is supported only on LX40 series

LX40 Series

  • LX41

  • LX42

  • LX43

  • LX44

  • LX45

 

 

1. Adjustments in Configuration

1.1. Adding Script

In configuration template ‘Script'->’Script1'->'Script' select ‘[BLE] DUT-E S7 V1.1’ script. When script is added script settings will appear below

image-20250523-114444.png

1.2. Configuring Script Peripheral Settings

In filter fill out MAC address of DUT-E S7 sensor. How to get MAC address can be found in documentation present in paragraph 2. DUT-E S7 LLS Documentation.

For ‘Temperature', ‘Fuel level’, ‘Frequency’, ‘Fuel volume’, ‘DTC’, 'RSSI’ select desired sensors where values will be saved, take note of selected sensors.

For this example we choose:

Frequency - sensor 40965
Temperature - sensor 24576
Fuel level - sensor 40964
Fuel volume - sensor 40965
DTC - sensor 16389
RSSI - sensor 28676

image-20250523-120024.png

1.3. Displaying in Monitoring Platform

For more in depth configuration of device configuration visit Quick Set Up Of Configuration

For device to report sensor values to telemetry platform sensors needs to be included into telemetry payload.

image-20250523-120744.png

2. DUT-E S7 LLS Documentation

Official documentation containing technical specifications, calibration and configuration info of Technoton DUT-E S7 fuel sensor.