Speed notification in geozones
Device monitors speed from GPS and can use it to notify driver, or Monitoring platform about overspeeding event. For local notification can be used buzzer or LED.
Functionality is supported by all Xirgo Global devices: ONE, Light, Light+, StCAN, Tacho, XtCAN.
Standard devices support 4 geozone states: no geozone, being inside geozone, being in 2 geozones at a time, or being in 3 geozones at a time. This functionality can be created, by creating layers of geozones.
Example is below:
Note. Device can not recognize one geozone from another. It can recognize only how many geozones in one place. It means, that all 1 layer geozones will have the same speed limit.
Task: Create a notification for driver about speed limits in different geozones.
To implement functionality, you should configure speed limits for different geozones states and configure output to get On on speed violation.
a) Output configuration.
Configure outputs to get activated based on speed threshold:
b) Speed configuration.
Configure speed in each geozone state. Use 5.i GPS_Speed_Thershold function.
States are following:
State | Meaning |
|---|---|
|
Device is outside geozone. |
|
Device is inside geozone (one layer). |
|
Device is inside 2 geozones at a time (2 layers). |
|
Device is inside 3 geozones at a time (3 layers). |