RS232 Control
RS-232 is a standard used for serial communication transmission of data. It allows to connect various electronic devices to our equipment and retrieve data from them.
Currently supported devices are represented in the table below.
Function name |
|
|---|---|
ADP-400 C | Not in use |
ADP-400 C Rev8 | Not in use |
LLS sensor reading | LLS standard protocol reading for Fuel level sensors. |
LLS sensor reading Rev8 | LLS standard protocol reading for Fuel level sensors. Additionally provides 5V for 1Wire interface. |
NMEA output | Output of NMEA standard to transmit GPS data. |
ES2 sensor reading | Protocol of ES-2 fuel level sensors reading. |
ES2 sensor reading Rev8 | Protocol of ES-2 fuel level sensors reading. Additionally provides 5V for 1Wire interface. |
Terminal | Transparent data sending function. Supports up to 250 bytes of text. Speed: 9600. Comes in DT11 types of packet. |
Terminal Rev8 | Disabled. |
CAN-LOG | CanLog reader protocol reading. |
CAN-LOG Rev8 | CanLog reader protocol reading. Additionally provides 5V for 1Wire interface. |
RFID TYP A |
|
6 pin Light 1-wire power supply | This function enabled 5V feeding for 1Wire interface. |
Modem AT command forward |
|
DataCold | DataCold thermograph protocol reading. |
DataCold Rev8 | DataCold thermograph protocol reading. Additionally provides 5V for 1Wire interface. |
CargoJot |
|
DZ300 | Sensors to work with concrete mixers. It is magnetic proximity sensors, which is designed for rotation speed and orientation detection. (http://www.dingtek.com/products/DZ300-cement-drum-sensor/ ) |
DZ300 Rev8 | Disabled. |
TRANSCAN-2 | Transcan-2 thermograph protocol reading. |
NMEA Rx | NMEA input for external GPS antennas. |
Thermo king touch print | Thermoking thermograph protocol reading. |
MODBUS mixer sensor |
|
DTK 11 display |
|
TELL fuel sensor |
|
EN15430_RS232 |
|
EN15430)RS232_AUTO_BR |
|