Data recording into data packet
For device to send data to the server, firstly it should have collected data to the memory.
Device can fix points (or fix data to the memory) based on following conditions:
3.4 Time based data fix.
In this option you can set maximum time, which should pass for device to fix a point. Minimum is 2 seconds (recommended is not less than 10), maximum is 6 hours. Using this option you can set times longer than 570 (limit of 2.3_Data_send_period). Example of configuration:
3.5 Angle based data fix.
In this option you can set threshold of angle, on which change point will be fixed. It is important to fix nice turns on track. Example of configuration:
3.6 Speed based data fix.
In this option you can set threshold of speed, on which change point will be fixed. It is important to fix accelerations of braking. Example of configuration:
3.7 Input change based data fix.
In this option you can set inputs, on which change, point will be fixed to device memory. Example of configuration:
3.8 Distance based data fix.
In this option you can set threshold of distance, so when it reached, point will be fixed. Example of configuration:
When time to send data to server comes up, device will send all fixed points history to the server.