FMS cable (CB-0008) With 120 Ohm Resistor
A truck FMS (Fleet Management System) connector provides provides trucks internal network data and Tachograph data. This Cable allows easy and fast installation of Xirgo Global device into truck providing CAN bus data, ignition signal and power from one connector.
XG37 Series
Tacho
LX40 Series
LX44
LX45
1. Cable Pinout and Color Coding
This cable has integrated 120 Ohm resistor into CAN line between Pin6 and Pin9. Make sure it is needed or it might short Truck CAN bus line
Device
GND
VDC
IN5
1-Wire
CAN H
CAN L
CAN2 H
CAN2 L
FMS Connector
Pin 1 - GND
Pin 12 - V+ battery
Pin 10 - Ignition
Pin 7 - D8
Pin 6 - CAN H
Pin 9 - CAN L
Pin 6 - CAN H
Pin 9 - CAN L
Color
Black
Red
Gray/Black
Brown
Yellow
Yellow/Black
Yellow
Yellow/Black