FMS cable (MK-0049)
A truck FMS (Fleet Management System) connector provides provides trucks internal network data and Tachograph data. This Cable allows easy and fast installation of Xirgo Global device into truck providing CAN bus data, ignition signal and power from one connector.
XG37 Series
Tacho
LX40 Series
LX44
LX45
1. Cable Pinout and Color Coding
Device
GND
VDC
IN5
1-Wire
CAN H
CAN L
CAN2 H
CAN2 L
FMS Connector
Pin 1 - GND
Pin 12 - V+ battery
Pin 10 - Ignition
Pin 7 - D8
Pin 6 - CAN H
Pin 9 - CAN L
Pin 6 - CAN H
Pin 9 - CAN L
Color
Black
Red
Gray/Black
Brown
Yellow
Yellow/Black
Important to notice that some vehicles might require 120ohm resistor between Pin6 and Pin9