For installation in outdoor, wet or dusty environment, we recommend upgrading to waterproof enclosure for XG37 series devices. Housing is rated IP67, meaning it is fully upgraded against dust ingress and can withstand temporary immersion in water. It’s the ideal choice for use on construction equipment, trailers, or exterior mounting points where environmental exposure is a concern. Choosing this upgrade ensures reliable performance and longer device lifespan in harsh conditions.

XG37 Series

Light
Light+
XtCAN
Tacho

1. Installing PCB Plate Into the Case

Step 1: Locate 4 locking pins that will hold PCB in place.

Step 2: Place PCB inside internal case using slight degree.

Step 3: Match PCB with locking pins and lock it.

Step 4: On cable there is latch that has to be locked with tracker connector locking pin.

Step 5: Locate tracker connector locking pin.

Step 6: Connect the cable.

Step 7: Locate external case locking pins.

Step 8: Match internal case locking pins with external ones.

Step 9: Lock up.

2. Waterproof Case Cables

Pinouts and color coding for cables:

IP67 Enclossure

1. Installing PCB Plate Into the Case

2. Waterproof Case Cables