Diagnostic trouble codes settings
Inside FMSet it's possible select which DTC mode to read - mode3, mode 7 or mode 10.
And you can select onto which sensor your desired trouble code should be set.
Nr. | Sensor name | Type | Description |
1. | Read DTC mode 3: | Setting | Select if you want to read this DTC mode |
2. | Store DTC mode 3: | Setting | Select where DTCs from mode above should be stored |
3. | Read DTC mode 7: | Sensor | Select if you want to read this DTC mode |
4. | Store DTC mode 7: | Sensor | Select where DTCs from mode above should be stored |
5. | Read DTC mode 10: | Sensor | Select if you want to read this DTC mode |
6. | Store DTC mode 10: | Sensor | Select where DTCs from mode above should be stored |
7. | Send Diagnostic Trouble Codes always | Sensor | If not selected device will read and send DTCs one time at the start of script. |
8. | Send Diagnostic Trouble Codes evry: | Sensor | Insert time how often DTCs should be sent, must be more than 0. |
