General settings
Configuration
Inside FMSet it's possible select which variables are important and onto what specific sensor to save them (note that your device might not report a value which you're expecting, depends on device and it's configuration):
Nr. | Sensor name | Type | Description |
1. | CAN OBD connection type: | Setting | Select which physical CAN connection is used. |
2. | Read VIN number when: | Setting | Select when VIN should be read |
3. | Store VIN number to: | Sensor | Select sensor to VIN |
4. | Store service 1 PID's supported [01 - 20]: | Sensor | Select sensor to store service 01 supported PID’s |
5. | Store service 1 PID's supported [21 - 40]: | Sensor | Select sensor to store service 01 supported PID’s |
6. | Store service 1 PID's supported [41 - 60]: | Sensor | Select sensor to store service 01 supported PID’s |
7. | Store service 1 PID's supported [61 - 80]: | Sensor | Select sensor to store service 01 supported PID’s |
8. | Store service 1 PID's supported [81 - A0]: | Sensor | Select sensor to store service 01 supported PID’s |
9. | Read service 1 PID's every: | Setting | Insert time how often new data should be read from vehicle |
10. | Stop reading parameters after: | Setting | Time after which when vehicle is no longer used device will stop requesting data. Time in seconds |
11. | Ignore diagnostics: | Setting | Select either to ignore car diagnostics while reading data or not |
OBD connection type can be chosen CAN1 or CAN2. This is our devices physical CAN1 or CAN2, so choose accordingly to which CAN you connected to OBD 6-14 pins. If you bought OBD II cable from us contact our support to know which setting should be chosen.
Ignore diagnostics - Check if you want to continue reading vehicles data even if car diagnostics is connected. If you car is equipped with smart LPG or CNG gas systems which connect to OBD II port this should be checked to get any data.
IMPORTANT: Due this at your own risk! If this checkbox is checked it is highly advisable to disconnect our module during car diagnostics or software update of any car ecu.