How to control Output’s with SMS/GPRS commands?

There is a possibility to control the device OUTPUT with an SMS or GPRS command.

Manual for settings configuration in order to control OUTPUT:

SMS command example:

Output activation: bestpassword S1=1

Output deactivation: bestpassword S1=0

note: This example applies only if static signal 1 is selected. In case static signal 2 is used command should be: bestpassword S2=1 or bestpassword S2=0

GPRS commands:

In order for the output to be controlled by a GPRS command, this functionality must be integrated into the software that You are using.

GPRS commands are explained in the device communication protocols: