Snowplough/broom data record (Code 6/7)

Snowplough/broom data record script description

Script Description

Script is capable of collecting separate variables from multiple record codes and storing them into sensors chosen by users. A single script is capable of parsing multiple record codes. To do that, user must select which record codes they want to parse by placing check mark on "Read this record" check box.

Configuration

Inside FMSet it's possible select which variables are important and onto what specific sensor to save them (note that your device might not report a value which you're expecting, depends on device and it's configuration):

Open

Full list of record code 6/7 Variables

ManufID and EquipID - Manufacturer and spreader identification of the system which generates this record.

DeviceEntity - If more than one implement is mounted on the vehicle, this indicator allows to differentiate between the individual implements.

Source - Data generation source.

System time and date - Time and date is in unix format.

PBPresent - Plough or broom is mounted (0=no, 1=yes)

PBpos - Plough/broom position 1= front-mounted, 2= side left, 3= side right, 4=between axes)

PBMode - Plough/broom in working position (0=no, 1=yes (with standard scraper blade), 2= yes with second scraper blade)

PBCntLen - Total driven length in working position (can start at any value at power-up, can overrun, can be reset when counters are reset).

PBCntHrs - Total working hours in working position (can start at any value at power-up, can overrun, can be reset when counters are reset).

DrivenLen - Driven length as interpreted and generated by the source (can start at any value at power-up, can overrun, can be reset when counters are reset).

RunHrs - Total of hours the system has run (time that control system is switched on); (can start at any value at power-up, can overrun, can be reset when counters are reset).

VehSpd - Vehicle speed (0 = not driving; any other value = driving)

GeoLat - Geographic position latitude in NMEA-0183 format: DDMM.mmmmR (two fixed digits of degrees, two fixed digits of minutes and a variable number of digits for decimal-fraction of minutes, R = reference - latitude direction: N=north, S=south). Example: 3339,7334 N = 33 º 39,7334’ north.

GeoLon - Geographic position longitude in NMEA-0183 format: DDDMM.mmmmR (three fixed digits of degrees, two fixed digits of minutes and a variable number of digits for decimal-fraction of minutes, R = reference - longitude direction: E=east, W=west). Example: 11751,7598 W = 117 º 51,7598’ west

GeoAlt - Geographic position altitude.

GeoSQ - Geographic position system signal quality (0=no fix, 1=2D, 2=3D, 3=differential correction active).

PBRelease - Plough release: plough weight passed onto vehicle (0=floating, 1=released) (this record is only optional and your device might not send any value. It depends on your device configuration).

PBRelPerc - Plough/broom release pressure % (0%=floating, 100%=fully released) (this record is only optional and your device might not send any value. It depends on your device configuration).

PBInfo - Extra plough/broom information e.g. orientation (left, right), enlargement (adding extra section(s)), deflector (up, down), etc. – supplier specific code (this record is only optional and your device might not send any value. It depends on your device configuration).

BrmRotSpd - Broom Rotation speed as a percentage of the maximum speed (this record is only optional and your device might not send any value. It depends on your device configuration).

PBOilT - Oil temperature of plough/broom (this record is only optional and your device might not send any value. It depends on your device configuration).

PBOilP - Oil working pressure on rotor (this record is only optional and your device might not send any value. It depends on your device configuration).

PBOilQ - Oil flow through rotor (this record is only optional and your device might not send any value. It depends on your device configuration).