Version | V1.0 |
Author | Giedrius Pupeikis |
Script name | BCE_SCEN_SCR-41 |
Last updated | 2019-8-02 |
Revision information | No revision |
Sensor - data to publish to broker.
Settings - user configurable settings.
Operating principle
Device sends SMS messages in format:
Event type | IMEI | Position link | Time of event |
Table 1. Descriptions of Events.
Nr. | Event type | Description |
1. | Over speeding event | SMS will be sent if currently GNSS speed is greater then current geozone limit or out of geozone bounds limit every 10 seconds while event is active |
2. | Ignition ON | SMS will be sent when ignition is turned on |
3. | Ignition OFF | SMS will be sent when ignition is turned off |
4. | Harsh braking | SMS will be sent when currently g-unit value is greater then configured limit. SMS will be sent every 5 seconds while violation is active |
5. | Harsh Acceleration | SMS will be sent when currently g-unit value is greater then configured limit. SMS will be sent every 5 seconds while violation is active |
6. | Power disconnection | SMS will be sent when power is disconnected and device have connected battery. SMS will be sent every 5 minutes while violation is active |
7. | Towing alert | SMS will be sent if ignition is turned off and GNSS speed is not zero for 15 seconds. SMS will be sent every 5 minutes while violation is active |
8. | Geofence alert | SMS will be sent if device is geozone with geozone alert checkbox. SMS will be sent every 5 minutes while violation active |
Note: BCE_MEAS_SRC41_2 must be used as script2 with name SMSScript.
Sensors value and settings definition
Table 2. Sensor and settings of phone numbers category definitions.
Nr. | Sensor name | Type | Description |
1. | Number of phone | Settings | Up to 10 phone numbers |
Table 3. Sensor and settings of geo-zone speed limit category definitions.
Nr. | Sensor name | Type | Description |
1. | Geozone ID | Settings | The geozone ID number that associates with the geofencig category ID. Up to 100 geozones groups |
2. | Geozone speed limit | settings | This value is speed limit of ID group |
3. | Alert | settings | Alert checkbox is used to select geozone group which generates alert SMS messages. |
Table 4. Sensor and settings of main settings category definitions.
Nr. | Sensor name | Type | Description |
1. | Braking limit | Settings | This is braking limit in g-units. |
2. | Acceleration limit | Settings | This is acceleration limit in g-units |
3. | SMS messages triggers | Settings | Triggers that generates SMS messages |
4. | GMT offset | Settings | To show correct GMT zone time GMT offset should be filled |
Connection
Image 1. Connection of FMS500 XtCan.