920i weight sensor script
Version | V1.0 |
Script name | BCE_MEAS_920i-SCR-22 |
Last updated | 2019-08-08 |
Revision information | No revision |
Sensor - data to publish to broker.
Settings - user configurable settings.
Operating principle
When weight operation is done then 920i sends messages which is read by FMS device. Then data is published to broker server. Packet from 920i have to be programmed as described in image 1.
Image 1. 920i programmed packet.
Table 1. Sensors and settings descriptions.
Nr. | Name | Type | Description |
1. | Client ID | Sensor | Client ID |
2. | Parity | Setting | Communication settings |
3. | Communication port | Setting | RS-232 or RS-485 |
4. | Debug | Setting | For development purpose |
5. | Number of Bin | Sensor | This will show current client bin number |
6. | Weight | Sensor | This will show weight of current bin of current client. Value in kg. |
7. | Total weight | Sensor | This will show current total wight of current client. Value in kg. |
8. | Communication port baud rate | Setting | Communication settings |
9. | Number of bits | Setting | Communication settings |
10. | Debug sensor | Sensor | This let see raw message from 920i if debug on |
11. | Type | Sensor | This will show current bin waste type |
note: Sensor_U32UserDefined1 (16390),Sensor_F32UserDefined2 (40965),Sensor_F32UserDefined3 (40966),Sensor_STRING3 (49154) cant be used in any other script with this script.
Connection
Image 2. Connection between FMS500 XtCan and 920 device RS485 ports.
Image 3.Connection between FMS500 XtCan and 920 device RS232 ports.
Device RS232 could be connected to one of 3 RS232 ports depending on data output from device.